Digidim DALI to 1-10V & DSI Converter 472
Rated 3.5/5 based on 11 customer reviews

Digidim DALI to 1-10V & DSI Converter 472

Availability: on request
R 4,265.22
EXCLUDING VAT
R 4,905.00
INCLUDING VAT


NB: Mobicred will only consider items priced under R35000

Quotes requested

Digidim_DALI_to_1-10V_DSI_Converter

 

The DIGIDIM 1–10 V & DSI® Converter has been designed to control electronic ballasts that comply with IEC 60929 and ballasts that comply with the DSI® standards. This ensures that DIGIDIM systems are compatible with, and easily integrated into, existing systems.

The Converter can switch a maximum of 15 Helvar electronic ballasts/drivers.

The analogue 1–10 V signal and the digital DSI® signal can control 50 electronic ballasts.

 

Key Features

  • Out-of-box operation provides control using DALI standard broadcast commands.
  • For 1–10 V control, the Converter can switch a maximum of 15 ballasts/drivers. An external contactor should be used for more ballasts.
  • Converter complies with DSI® 1 and DSI® 2 standards.
  • Default light output at initial power up is 100 %.
  • Universal supply voltage operation. 
  • DIN-rail mounted and only 70 mm wide. 
  • Easy programming by using the group selection switch.

 

Additional Functions 

  • Controller status report. 
  • System failure level/Ignore. 
  • Power on to last level. 
  • Sink or source mode. 
  • Max./Min. levels, Fade times*, Scenes* and Groups*. * These functions are programmable using a Helvar infrared remote control.

Digidim_DALI_to_1-10V_DSI_Converter

 

The DIGIDIM 1–10 V & DSI® Converter has been designed to control electronic ballasts that comply with IEC 60929 and ballasts that comply with the DSI® standards. This ensures that DIGIDIM systems are compatible with, and easily integrated into, existing systems.

The Converter can switch a maximum of 15 Helvar electronic ballasts/drivers.

The analogue 1–10 V signal and the digital DSI® signal can control 50 electronic ballasts.

 

Key Features

  • Out-of-box operation provides control using DALI standard broadcast commands.
  • For 1–10 V control, the Converter can switch a maximum of 15 ballasts/drivers. An external contactor should be used for more ballasts.
  • Converter complies with DSI® 1 and DSI® 2 standards.
  • Default light output at initial power up is 100 %.
  • Universal supply voltage operation. 
  • DIN-rail mounted and only 70 mm wide. 
  • Easy programming by using the group selection switch.

 

Additional Functions 

  • Controller status report. 
  • System failure level/Ignore. 
  • Power on to last level. 
  • Sink or source mode. 
  • Max./Min. levels, Fade times*, Scenes* and Groups*. * These functions are programmable using a Helvar infrared remote control.