Digidim 458 - Triple Module Chassis with (4 X 10A + 8 X 10A + 8 X 10A MCB) 458M3/4S108S108S10
Rated 3.5/5 based on 11 customer reviews

Digidim 458 - Triple Module Chassis with (4 X 10A + 8 X 10A + 8 X 10A MCB) 458M3/4S108S108S10

Availability: on request
R 29,052.17
EXCLUDING VAT
R 33,410.00
INCLUDING VAT


NB: Mobicred will only consider items priced under R35000

Quotes requested

Digidim_458 

The Digidim 458Mx is a range of mechanical chassis to which one, two or three Digidim 458 series modules can be fitted to provide up to 24 channels of control. Each load channel is protected by an individual MCB.

Each chassis contains one, two or three sections, depending on the chassis size selected, and has either four or eight load circuit MCBs, depending on the variant. Each chassis section has a control circuit MCB, and a set of output terminals for the connection of load wiring.

The Mx Chassis can be fully installed and wired before fitting the module(s), as the chassis are supplied with module by-pass connectors. All electrical installation, testing and powering up of the lighting circuits can thus be carried out before fitting the modules. This prevents possible damage to the modules due to load circuit overload or faults, or to the use of high voltage insulation testing equipment.

A 458M1 is for a single module. A combination of up to two modules can be used with the 458M2, and up to three modules with the 458M3 Chassis. Available module types are DIM4, DIM8, CTR8, SW8, and UNI8.

Note: Mx Chasssis are supplied without modules. These can be ordered separately to suit the particular load type.

 

Key Features

  • Wall-mounted vertically; installer-friendly.
  • Modular system – Lights and wiring can be tested, then control modules fitted. – Control modules simple to attach and remove.

Digidim_458 

The Digidim 458Mx is a range of mechanical chassis to which one, two or three Digidim 458 series modules can be fitted to provide up to 24 channels of control. Each load channel is protected by an individual MCB.

Each chassis contains one, two or three sections, depending on the chassis size selected, and has either four or eight load circuit MCBs, depending on the variant. Each chassis section has a control circuit MCB, and a set of output terminals for the connection of load wiring.

The Mx Chassis can be fully installed and wired before fitting the module(s), as the chassis are supplied with module by-pass connectors. All electrical installation, testing and powering up of the lighting circuits can thus be carried out before fitting the modules. This prevents possible damage to the modules due to load circuit overload or faults, or to the use of high voltage insulation testing equipment.

A 458M1 is for a single module. A combination of up to two modules can be used with the 458M2, and up to three modules with the 458M3 Chassis. Available module types are DIM4, DIM8, CTR8, SW8, and UNI8.

Note: Mx Chasssis are supplied without modules. These can be ordered separately to suit the particular load type.

 

Key Features

  • Wall-mounted vertically; installer-friendly.
  • Modular system – Lights and wiring can be tested, then control modules fitted. – Control modules simple to attach and remove.