Ajax FireProtect Plus Wireless Fire Detector with Temperature Sensor FR421W
Rated 3.5/5 based on 11 customer reviews

Ajax FireProtect Plus Wireless Fire Detector with Temperature Sensor FR421W

Availability: on request
R 1,439.13
EXCLUDING VAT
R 1,655.00
INCLUDING VAT


NB: Mobicred will only consider items priced under R35000

Quotes requested
Ajax_FireProtect_Plus.pdf

Ajax Catalogue.pdf 

FireProtect Plus

Wireless fire detector with temperature and carbon oxide sensors that monitors security in the room twenty four hours a day and immediately notifies of dangerous CO levels, smoke and sharp jumps in temperature.
  • Authentication to prevent forgery
  • Jamming detection and communication channels encryption
  • Tampering alarm
  • Registers smoke and sharp jumps in temperature in the room
  • Can operate independently from Ajax Hub, notifying of danger by means of a built-in siren
  • Independently tests the smoke chamber and gives prompt notification of the need to dust

Maximum Рerformance

  • Works up to 1,300 meters from Ajax Hub in open space or across several floors of a business center
  • Smoke detection
  • Rapid temperature increase even without smoke immediately activates an alarm
  • Interconnected alarms
  • Double-check before sending alarm

Principle of operation

The device detects smoke by means of a camera with photoelectric sensor. If no smoke is emitted, the additional detector registers temperature increase in the room.
Effortless Operation
  • Can work autonomously without Ajax Hub
  • Has a built-in siren for smoke or heat alarms
  • Checks the smoke chamber with a click in mobile app
  • Notifies users when it’s time to clean smoke chamber
  • Two-way communication with Ajax Hub allows for periodic testing and customization

Features

It can operate independently from the hub, emitting a fire alarm by means of a built-in siren. Several detectors indicate an alarm simultaneously.

Bulletproof Protection

  • Authentication to prevent forgery
  • Jamming detection and communication channels encryption
  • Tampering alarm

Installation and set up

Ready to operate straight out the box: the battery is already installed, therefore there is no need to disassemble the detector. With one click, it can be connected to the hub in the mobile application. It can be mounted on the SmartBracket in just a few minutes.

Simple Installation

  • Connects to Ajax Hub with a single click
  • The quality of the connection can be tested remotely
  • No need to disassemble the body when installing using SmartBracket mounts

Tech specs

Classification
Radio channel smoke detector with temperature sensor and built-in siren
Type of detector
Wireless
Installation method
Indoors
Compatibility
Operates independently or with Hub, Hub Plus, Hub 2, ReX, ocBridge Plus, uartBridge
Sensing element
Photoelectric and temperature sensors
Activation threshold
+59°С ±2°С
Type of notification
Sound/light
Volume of built-in siren
85 dB
Alarm signal delivery time
0.15 s
False alarm filter
+
Interconnected alarms
+
Power supply
Battery: Two CR2 batteries, 3 V
Backup battery: CR2032
Battery life
Up to 4 years

Learn more
Jeweller radio technology
Communication range with central unit — up to 1,300 m in an open space
Two-way communication between devices
Operating frequencies — 868.0-868.6 MHz
Self-adjusting RF output power — up to 20 mW
Block encryption based on AES algorithm
Detector polling period — 12−300 s

Learn more about Jeweller
Additional temperature sensor
Available
Operating temperature range
From 0°С to +65°С
Permissible humidity
Up to 80%
Anti-sabotage
Protection against fraud
Jamming detection
Tamper-resistant
Remote setting and testing
+
Dimensions
132 × 132 × 31 mm
Weight
220 g
Certification
EN 14604
Warranty
Replacement and repair within 24 months of the date of sale. Batteries are not covered under warranty.
Complete set
FireProtect detector
SmartBracket mounting panel
2 x CR2 batteries (pre-installed)
1 x backup battery CR2032 (pre-installed)
Installation set
User’s guide

More Info 

FireProtect (FireProtect Plus) is a wireless indoor fire detector with an in-built buzzer and a battery, ensuring up to 4 years of autonomous operation. FireProtect can detect smoke and rapid temperature increase.

Aside from these functions, FireProtect Plus additionally can alert of dangerous CO level. Both detectors can function independently from the hub.

Connecting to the Ajax security system via a secured Jeweller radio protocol, FireProtect (FireProtect Plus) communicates with the hubat a distance of up to 1,300 m in line of sight.

The detector can be a part of third-party security systems, connecting to them via the Ajax uartBridge or Ajax ocBridge Plus integration module.

The detector is set up via the Ajax apps for iOS, Android, macOS, and Windows. The system notifies the user of all events through push notifications, SMS, and calls (if activated).

The Ajax security system can be connected to a central monitoring station of a security company.

Ajax_FireProtect_Plus.pdf

Ajax Catalogue.pdf 

FireProtect Plus

Wireless fire detector with temperature and carbon oxide sensors that monitors security in the room twenty four hours a day and immediately notifies of dangerous CO levels, smoke and sharp jumps in temperature.
  • Authentication to prevent forgery
  • Jamming detection and communication channels encryption
  • Tampering alarm
  • Registers smoke and sharp jumps in temperature in the room
  • Can operate independently from Ajax Hub, notifying of danger by means of a built-in siren
  • Independently tests the smoke chamber and gives prompt notification of the need to dust

Maximum Рerformance

  • Works up to 1,300 meters from Ajax Hub in open space or across several floors of a business center
  • Smoke detection
  • Rapid temperature increase even without smoke immediately activates an alarm
  • Interconnected alarms
  • Double-check before sending alarm

Principle of operation

The device detects smoke by means of a camera with photoelectric sensor. If no smoke is emitted, the additional detector registers temperature increase in the room. Effortless Operation
  • Can work autonomously without Ajax Hub
  • Has a built-in siren for smoke or heat alarms
  • Checks the smoke chamber with a click in mobile app
  • Notifies users when it’s time to clean smoke chamber
  • Two-way communication with Ajax Hub allows for periodic testing and customization

Features

It can operate independently from the hub, emitting a fire alarm by means of a built-in siren. Several detectors indicate an alarm simultaneously.

Bulletproof Protection

  • Authentication to prevent forgery
  • Jamming detection and communication channels encryption
  • Tampering alarm

Installation and set up

Ready to operate straight out the box: the battery is already installed, therefore there is no need to disassemble the detector. With one click, it can be connected to the hub in the mobile application. It can be mounted on the SmartBracket in just a few minutes.

Simple Installation

  • Connects to Ajax Hub with a single click
  • The quality of the connection can be tested remotely
  • No need to disassemble the body when installing using SmartBracket mounts

Tech specs

Classification Radio channel smoke detector with temperature sensor and built-in siren Type of detector Wireless Installation method Indoors Compatibility Operates independently or with Hub, Hub Plus, Hub 2, ReX, ocBridge Plus, uartBridge Sensing element Photoelectric and temperature sensors Activation threshold +59°С ±2°С Type of notification Sound/light Volume of built-in siren 85 dB Alarm signal delivery time 0.15 s False alarm filter + Interconnected alarms + Power supply Battery: Two CR2 batteries, 3 V
Backup battery: CR2032
Battery life Up to 4 years

Learn more
Jeweller radio technology Communication range with central unit — up to 1,300 m in an open space
Two-way communication between devices
Operating frequencies — 868.0-868.6 MHz
Self-adjusting RF output power — up to 20 mW
Block encryption based on AES algorithm
Detector polling period — 12−300 s

Learn more about Jeweller
Additional temperature sensor Available Operating temperature range From 0°С to +65°С Permissible humidity Up to 80% Anti-sabotage Protection against fraud
Jamming detection
Tamper-resistant
Remote setting and testing + Dimensions 132 × 132 × 31 mm Weight 220 g Certification EN 14604 Warranty Replacement and repair within 24 months of the date of sale. Batteries are not covered under warranty. Complete set FireProtect detector
SmartBracket mounting panel
2 x CR2 batteries (pre-installed)
1 x backup battery CR2032 (pre-installed)
Installation set
User’s guide

More Info 

FireProtect (FireProtect Plus) is a wireless indoor fire detector with an in-built buzzer and a battery, ensuring up to 4 years of autonomous operation. FireProtect can detect smoke and rapid temperature increase.

Aside from these functions, FireProtect Plus additionally can alert of dangerous CO level. Both detectors can function independently from the hub.

Connecting to the Ajax security system via a secured Jeweller radio protocol, FireProtect (FireProtect Plus) communicates with the hubat a distance of up to 1,300 m in line of sight.

The detector can be a part of third-party security systems, connecting to them via the Ajax uartBridge or Ajax ocBridge Plus integration module.

Buy fire detector with carbon monoxide sensor FireProtect Plus

The detector is set up via the Ajax apps for iOS, Android, macOS, and Windows. The system notifies the user of all events through push notifications, SMS, and calls (if activated).

The Ajax security system can be connected to a central monitoring station of a security company.